Foundation Waterproofing
Protecting the structure everything sits on
What foundation waterproofing actually involves
Water reaching a foundation does slow, expensive damage — corroding reinforcement, eroding mortar joints, and moving moisture into the framing above. Foundation waterproofing seals stem walls, footings, and slab edges, and pairs that membrane with drainage that carries water away from the building. On new construction we install before backfill; on existing structures we excavate, repair, and rebuild the assembly properly.
Every project starts the same way: we look at the property, establish what water is doing and where it is entering, and only then specify a system. That order matters — a correctly installed product solving the wrong problem still leaves you with a wet building.
Included in every foundation waterproofing project
- New construction and retrofit foundation systems
- Stem wall, footing, and slab edge treatment
- Concrete crack and honeycomb repair before sealing
- Perimeter footing drain installation and repair
- Drainage board and filter fabric layers
- Grade correction to move water away from the building
Four steps from first call to sign-off
Foundation Inspection
We evaluate the foundation, existing drainage, and soil conditions around the entire perimeter.
Excavate & Repair
Where needed we excavate to footing depth and repair cracks and voids in the concrete.
Membrane & Drainage
Membrane, protection board, and perimeter drain are installed as one connected system.
Backfill & Grade
We backfill in lifts and regrade so surface water is directed away from the structure.
The difference a properly built assembly makes
Waterproofing is buried work. Once the backfill, topping slab, or tile goes over it, nobody sees the detailing again — which is exactly why the details have to be right the first time.
Diagnosed First
We confirm where water is genuinely entering before specifying anything, so the work targets a cause rather than a symptom.
Matched to Conditions
Substrate, exposure, and water pressure decide the system. The same product is not right for every property.
Prepared Properly
Profiled, cleaned, moisture-tested surfaces. Preparation is where most failed waterproofing jobs actually went wrong.
Tested & Documented
Flood tests, electronic detection, and photo records so you have proof the assembly performs before it is covered up.
Detail-driven from start to finish
Durable waterproofing comes from disciplined habits, not premium product names. Here is the standard we hold ourselves to on every project.
A Written Scope
You get the system, the sequence, and the expected result in writing before work begins.
Substrate Preparation
Grinding, profiling, and repair to a sound surface — never a coating applied over unsound concrete.
Reinforced Detailing
Corners, drains, penetrations, and joints get reinforcement, because that is where assemblies fail.
Site Protection
Landscaping, hardscape, finishes, and adjacent surfaces are protected for the length of the project.
Verification Before Close-Out
Testing under real conditions, then a walkthrough so nothing gets buried on assumption.
Questions, answered
Related services
Under Tile Waterproofing
Membrane systems installed beneath tile
View Under Tile Waterproofing detailsBetween Slab Waterproofing
Protection sandwiched between structural pours
View Between Slab Waterproofing detailsPlanter Box & Block Wall Waterproofing
Sealing constantly wet retaining structures
View Planter Box & Block Wall Waterproofing detailsGet a free estimate for foundation waterproofing
Share a few details about the property and we will come back with clear next steps — usually the same business day.